By default, an Asset Tag 2 Mini is shipped from Kontakt.io with its power OFF and must be powered ON for use.
Topics in this article:
If a tag's LED does not blink after pressing and quickly releasing its button, follow these steps to turn it ON:
-
Press and hold its front side button for 5 seconds.
-
Once you observe the LED blinking, it indicates that the tag is now powered ON.
To power off a tag, follow these steps:
-
Press and hold either the blue or red button for 5 seconds.
-
Once the LED stops blinking, it indicates that the tag has been turned OFF.
To verify if the tag is powered on, press and quickly release its button. Look for the LED to blink for a few seconds as a confirmation it's powered on
Warning
Continuously pressing the tag's button may result in activating a button press event. If you do not see its LED flashing after a button press, do not press its button for 5 seconds to allow the tag to clear the previous button event.