By default, the battery-powered Smart Badge is shipped from Kontakt.io with its power turned ON. If a badge is shipped with its power OFF, its packaging will include a sticker indicating that it must be powered ON before use.
-
Press and quickly release the blue or red button.
-
The button LED should blink for a few seconds, confirming that the badge is powered ON.
Warning
Continuously pressing either button may result in activating a button press event. If you do not see an LED blink after a button press, do not press a button for 5 seconds to allow the device to clear the previous button event.
If a badge's LED does not blink after pressing and quickly releasing a button, follow below steps to turn it ON.
-
Press and hold the blue or red button for 5 seconds.
-
The button LED should blink for a few seconds, confirming that the badge is powered ON.
Note
This feature is disabled by factory default and managed from a badge's Power Off setting within Device Management 2.0.
-
Press and hold either the blue or red button for 5 seconds.
-
Once the LED stops blinking, this indicates the badge is powered OFF.
When OFF, the LED does not blink when pressing and quickly releasing a button.