With the following default settings, a Portal Beam has a battery life of 4 years.
Use Case |
Settings |
---|---|
Room Occupancy |
Portal Beam takes a thermal image every 60 seconds. Konakt.io Telemetry Packets enabled at 350ms and -12 dBm TX Power (3). |
Seat-Level Occupancy |
Portal Beam takes a thermal image every 60 seconds. Konakt.io Telemetry HiPackets enabled at 350 ms and -12 dBm TX Power (3). |
Footfall Traffic Counting |
This mode requires an external AC power source. The Portal Beam takes five thermal images per second. Konakt.io Telemetry Packets enabled at 350ms and-12dBm TX Power (3). |
Environment Monitoring |
Sensor reading (probing) interval: 1 minute. |
Mobile Indoor Navigation |
iBeacon packets enabled at 350 ms and -12 dBm TX Power (3). |
Asset & Badge Tracking |
Infrared IR blink interval every second. BLE-RSSI Fingerprinting every |
Power Saving Mode |
Power Saving mode is enabled and set to a daily 12 hour working-hour schedule. |
Battery life can be extended by turning off specific modes, reducing the occupancy image taking rate, to increasing its active power-saving hours. Prior to making these types of configuration changes, we recommended reaching out to our support team to review your requirements.