By default, the battery-powered Asset Tag 2 is shipped from Kontakt.io with its power turned ON. If a tag is shipped with its power OFF, its packaging will include a sticker indicating that it must be powered ON before use.
Topics include:
-
Press and quickly release its blue or red button.
-
The button LED should blink for a few seconds, confirming that the tag is powered ON.
Warning
Continuously pressing either of the tag's buttons may result in activating a button press event. If you do not see an LED flashing after a button press, do not press a button for 5 seconds to allow the tag to clear the previous button event.
If a tag's LED does not blink after pressing and quickly releasing the blue or red button, follow the below steps to turn it ON.
-
Press and hold the blue or red button for 5 seconds.
-
The button LED should blink for a few seconds, confirming that the tag is powered ON.