triangulation project with the beacon

Answered

CARLOS SALDANA

• 13 March 2018 13:46

technical help hi This is working on a triangulation project with the beacon but I have problems with the intensity of the signal, also beacon are confused to be close to them, it is not possible to distinguish between one and another and these are co-founded at the time of triangulation, I can only get up to four meters, do you have an example for this case? , it would help me a lot because this project is fulfilling its stage and I have no results.

0

• Official comment

  

  Adrian Ziobro

  • 14 March 2018 09:41

  Every project that uses any kind of radio signals for triangulation/trilateration should take into the considerations the intrinsic signal variables, interferences at given frequencies, etc. Using raw RSSI values without any kind of filtering probably is not the best idea.

  Radio-based triangulation/trilateration is a quite complex issue, but there are companies that use our beacons for indoor navigation/positioning, so it's definitely possible and feasible, but Kontakt.io does not provide any specific tools for that.
• 

  Hoda Kazemzadeh

  • 09 April 2018 14:52

  I would need for indoor positioning. which companies use your beacons for that purpose?

  Thanks in advance

  0

Please sign in to leave a comment.