The Kontakt.io Asset Tag 2 casing has an IP67 rating, indicating it is resistant to dust and water. Follow the cleaning and care procedures below to maintain its integrity and operation.
The following provides the cleaning and care guidelines.
-
Dust and Debris Removal: Use a soft, lint-free cloth or brush to gently remove any dust or debris from the device's exterior. Avoid using compressed air, as it may force particles into sensitive areas or damage seals.
-
Damp Cloth Cleaning: Dampen a soft cloth with water or a mild, non-abrasive cleaning solution. Gently wipe the device's surfaces, being cautious not to let any liquid enter its seals or openings. Avoid using excessive moisture, as it may compromise the device's waterproofing.
-
Avoid Harsh Substances: Do not use abrasive materials, harsh chemicals, solvents, or strong cleaning agents, as they may damage the device's exterior or seals. Avoid contact with oils, greases, and strong acids or alkalis, as they can degrade the device's protective coatings.
-
Cleaning Agents: You can use a mild, non-abrasive cleaning solution or alcohol-based wipes specifically designed for electronics. Ensure that the cleaning agent is compatible with the device's materials and does not contain harsh chemicals that may damage the device.
Kontakt.io recommends using the below disinfectants or equivalent for cleaning both the surface of an Asset Tag and the equipment a tag is attached to. These commonly used disinfectants have undergone testing on Kontakt.io devices to ensure their compatibility and effectiveness.