With the following default settings, a Portal Beam has a battery life of 4 years.
|
Configured parameter |
Default setting |
|---|---|
|
Room Occupancy |
Portal Beam takes a thermal image every 60 seconds Konakt.io Telemetry Packets enabled at 1000ms and -4dBm TX Power (5) |
|
Seat-Level Occupancy |
Portal Beam takes a thermal image every 60 seconds Konakt.io Telemetry Packets enabled at 1000ms and -4dBm TX Power (5) |
|
Footfall Traffic Counting |
This mode requires an external AC power source The Portal Beam takes five thermal images per second Konakt.io Telemetry Packets enabled at 350ms and--4dBm TX Power (5) |
|
Environment Monitoring |
Sensor reading (probing) interval: 10 minutes |
|
Mobile Indoor Navigation |
iBeacon packets: disabled |
|
Asset & Badge Tracking |
Infrared IR blink interval: once every two seconds BLE-RSSI Fingerprinting: every 1 minute every 23 hours |
|
Power Saving Mode |
Enabled and set to a daily 12-hour working-hour schedule |
Battery life can be extended by turning off specific modes, reducing the occupancy image taking rate, to increasing its active power-saving hours.
Prior to making power-saving configuration changes, we recommended reaching out to our support team to review your requirements.